| Customization: | Available |
|---|---|
| Color: | Lime Green |
| Type: | Mixture |
|
Still deciding? Get samples of $ !
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Commodity | Multi purpose artificial grass |
| Gauge | 3/16 inch |
| Pile height | 8mm-12mm |
| Roll width | 2m,4m(±20mm) |
| Roll length | 15m-25m(or as buyer's requirement) |
| Texture(Material) | Monofilament PE/PP grass fiber,nylon grass silks,SBR Latex |
| Colour | Green /customer's requirement |
| Dtex | 3000-4500 Dtex |
| Backing | One layer PP woven cloth plus fleece&SBR Glude |
| Glue | SBR Latex ,PU latex |
| Usage | Sports center,club,square,park,balcony and leisure facility |
| Warranty | 5-8 years |
1.Construction instructions for turf adhesion
1.1 Ensure that the turf base and interface cloth designated for bonding are immaculately clean and perfectly dry. This impeccable condition is crucial for achieving the best possible adhesion, allowing the turf to stay securely in place.
1.2 Choose a construction environment with a temperature above 5°C. It's key to avoid rainy or damp conditions, as these can extend bonding times or lead to adhesion issues.
2. The specific construction process:
2.1 Glue Application: Use a glue applicator to apply an even layer of adhesive to the surface. Avoid repeated applications to prevent bubbles or detachment. Ensure the base cloth is evenly coated. Apply glue to both bonding surfaces at a steady pace.
2.2 Viscosity Control: Take into account factors like temperature, humidity, and air pressure to optimize drying time. Generally, a period of 10 to 30 minutes is needed post-gelatinization for the glue to become nearly dry and non-sticky. Be precise in alignment during bonding, as repositioning isn't an option once contact is made.
2.3 Pressure Application: After bonding, remove any debris from the surface, and use a specialized rubber hammer to firmly press outwards from the bonding point. This ensures a full contact surface and enhances adhesion strength.
2.4 Curing Process: The typical curing period is three days to reach initial strength, fully curing in approximately ten days. During this crucial phase, protect the turf from exposure, flooding, or movement to ensure the highest adhesion quality.
2.5 Post-Bonding Care: Do not apply quartz sand or rubber particles once bonding is completed, to maintain the integrity of the adhesion.
){kind=link}