| Customization: | Available |
|---|---|
| Color: | Lime Green |
| Type: | Mixture |
|
Still deciding? Get samples of $ !
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Commodity | Multi purpose artificial grass |
| Gauge | 3/16 inch |
| Pile height | 8mm-12mm |
| Roll width | 2m,4m(±20mm) |
| Roll length | 15m-25m(or as buyer's requirement) |
| Texture(Material) | Monofilament PE/PP grass fiber,nylon grass silks,SBR Latex |
| Colour | Green /customer's requirement |
| Dtex | 3000-4500 Dtex |
| Backing | One layer PP woven cloth plus fleece&SBR Glude |
| Glue | SBR Latex ,PU latex |
| Usage | Sports center,club,square,park,balcony and leisure facility |
| Warranty | 5-8 years |
1.Construction instructions for turf adhesion
1.1 Before initiating the bonding process, ensure that both the turf base and the interface cloth are thoroughly cleaned and dried. A pristine and moisture-free surface is critical to achieving a flawless adhesion.
1.2 Optimal bonding results are achieved when the ambient temperature exceeds 5 degrees Celsius. Avoid undertaking construction in rainy or humid conditions, as this can prolong bonding times or even result in adhesion failure.
2. Detailed construction process:
2.1. Glue Application: Utilize a glue applicator to evenly distribute a uniform layer of adhesive. Avoid reapplying glue to prevent bubbling and potential peeling. Glue should be applied to both surfaces intended for bonding, maintaining an appropriate thickness and speed of application.
2.2. Viscosity Control: Adjust the drying time based on environmental factors like temperature and humidity. Typically, after 10 to 30 minutes, the adhesive reaches an optimal dry state. Align the surfaces precisely during bonding, as repositioning is not advisable once contact has been made.
2.3 Pressure Application: Once bonded, clear away any debris. Employ a specialized rubber hammer to apply pressure from the center towards the edges, ensuring the surfaces are fully compacted for a robust bond.
2.4 Curing Phase: The adhesive generally requires three days to cure, with full strength achieved in ten days. Protect the area from exposure, moisture, and movement during curing to attain superior adhesion.
2.5. Note: Post-bonding, refrain from adding quartz sand or rubber particles to the surface.
){kind=link}