| Customization: | Available |
|---|---|
| Color: | Lime Green |
| Type: | Mixture |
|
Still deciding? Get samples of $ !
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Commodity | Multi purpose artificial grass |
| Gauge | 3/16 inch |
| Pile height | 8mm-12mm |
| Roll width | 2m,4m(±20mm) |
| Roll length | 15m-25m(or as buyer's requirement) |
| Texture(Material) | Monofilament PE/PP grass fiber,nylon grass silks,SBR Latex |
| Colour | Green /customer's requirement |
| Dtex | 3000-4500 Dtex |
| Backing | One layer PP woven cloth plus fleece &SBR Glude |
| Glue | SBR Latex ,PU latex |
| Usage | Sports center,club,square,park,balcony and leisure facility |
| Warranty | 5-8 years |
1.Construction instructions for turf adhesion
1.1It is necessary to clean and clean the turf bottom and interface cloth that needs to be bonded, and the surface is dry and moisture free.
1.2The ambient temperature should be chosen above 5, and the construction should not be carried out in rainy and mildew weather, otherwise the bonding time will be too long or even cause non-sticking phenomenon.
2. The specific construction process:
2.1. glue: Require to use the glue applicator on the surface of the coating thickness uniform, can not repeatedly glue, otherwise there will be bubbling phenomenon, or even fall. The bottom cloth uses glue applicator, strictly control the thickness of glue, pay attention to the appropriate speed of glue coating, glue coating should be applied on the two bonded surface.
2.2. Viscosity: According to the actual influence of temperature, humidity, air pressure and other conditions at that time, reasonably control the drying time. Generally, 10 to 30 minutes after gelatinization, eight or nine of the glue is dry, and the touch is not sticky. When bonding, it requires a one-time alignment of the adhesive, and must not be glued and then moved back to the bonded object.
2.3 Pressure: After bonding, remove the surface debris, use a special rubber hammer from the bonding place to both sides of the hammer, so that the surface of the full contact compact, bonding more firmly.
2.4, curing: the curing time is usually three days, and the final strength is usually ten days. During curing, attention should be paid to maintaining, avoiding exposure, flooding and moving, reaching the best state of adhesion.
2.5. No quartz sand and rubber particles were bonded after bonding.
){kind=link}